Sludge concentrator，Is a concentration and clarification equipment for central transmission continuous or intermittent work。
Sludge concentrators are mainly used in metallurgical industries、Continuous casting、Hot rolled and water plant and other water treatment systems or for coal、Chemical industry、Building materials and water sources、Concentration or purification of all solid slurry in industries such as sewage treatment。It can also be used in the fine in wet mineralization operations.、Tail ore pulp concentrated dehydration。
Main components and characteristics of sludge concentrator：The concentrator is concentrated、Special design large torque water bridge、Primary biography、Enhancement mechanism、Switch and other five parts。
1、The main drive mechanism master drive is a system that drives the rotation of the rake.，Mainly by electric motor、Clear line gear reducer and main worm wheel，In order to ensure the need to improve the rake of the rake，Squeezing and vertical axis，In the case of normal operation，The vertical axis can be freely up and down to do axial movement。
2、Lifting mechanism and torque determination switch protection device is running，If the concentrator is overloaded，The lifting mechanism can lift the slag by serial vertex，To ensure mechanical safety operation。Its main structure consists of two parts：Special design and manufactured torque assay switch、Alarm、Control device and actuator。
Sludge concentrator is generally mainly mainly concentrated pool、Rack、transmission、粑 粑 提 装置、Feed device、Unloading device and signal safety device concentrator at work，Sludge concentrator has a unloading hopper discharged concentrated product in the center of the bottom of the pool，A ring overflow channel is provided around the pool。
Sludge concentrator characteristics：An a vertical axis is attached to the cylindrical gear reducer at the center of the concentrated pool.、Intermediate gear and worm gear speed drive rotation。When the vertical axis is rotated，The slurry flows into the center of the pool along the mineral slot on the truss.，And to the surrounding fluid flow。The solid particles in the concentrated mine slurry gradually settle to the bottom of the concentrated pool.，And scraped into the tank of the pool center by the scraper below，Sand pump is discharged。The aqueous layer of clarified is out of the ring overflow trough on the upper portion of the pool.。
Working principle of sludge concentrator
Sludge concentrators are generally used as precallmented mines before filtration or use as tail mine dehydration。Concentrator、The concentrator is suitable for filtration of concentrate concentration or tailings dehydration before filtration，Can also be widely used in smelting、coal、Chemical industry、Concentration and purification of solid slurry in industries such as building materials and water water and sewage treatment。